M - functions.PDF

(9 KB) Pobierz
M - functions
M 00
M 01
M 02
M 03
M 04
M 05
M 06
M 07
M 08
M 09
M 10
M 11
M 12
M 13
M 14
M 16
M 17
M 18
M 19
M 20
M 21
M 22
M 23
M 24
Programmed Stop
Stop to be selected
End of program
Spindle right-hand rotation
Spindle left-hand rotation
Spindle Stop
Tool change
Coolant 2 ON
Coolant 1 ON
Coolant OFF
Close clamping fixture (*)
Open clamping fixture
Rotate index table
Left spindle right-hand rotation (DZ..)
Left spindle left-hand rotation (DZ..)
Tool change left side (DZ..)
End of subroutine
Coolant 3 ON
Position spindle
Open loading door (*)
Close loading door (*)
Rotate index table to Home Pos.
Right spindle right-hand rotation (DZ..)
Right spindle left-hand rotation (DZ..)
M 60 Work piece counting pulse
M 61 Inquiry: working area 1
M 62 Inquiry: working area 2
M 64
M 65
M 66
M 67
Close work piece gripper
Open work piece gripper
Open tool collet (Pick Up Start)
Clamp tool (Pick Up)
M 69 Inquiry tool breakage
M 70 Confirmation with loading door
M 71 Change working area
M 87 Light barrier / measuring bush ON
M 82 Open clamping 4th/5th axis
M 83 Close clamping 4th/5th axis
M 88
M 89
M 90
M 91
M 92
M 93
Service selection
End of Service
Service lift swivel table
Service lower swivel table
Service by-pass confirmation
Read in temperature values
M 95 Spindle Stop and coolant OFF
M 26 Tool change right side (DZ..)
M 30 End of program with Reset
M 31 Working area 1 under spindle
M 32 Working area 2 under spindle
M 38 Mirroring X-axis
M 39 Mirroring Y-axis
M 40 Delete mirroring X and Y
M 49 Tool basket downwards (SERVICE not with
chain magazine)
M 51 Gripper upwards (SERVICE not with chain
magazine)
M 52 Gripper downwards (SERVICE not with chain
magazine)
CHIRON-Werke GmbH & Co KG
Talstraße 23
D-78532 Tuttlingen
995-1
Printed in Germany
38

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin