Tool changer special functions (Basket).pdf
(
20 KB
)
Pobierz
FZ-DZ 15-pos.T (basket changer)
2.7
Special functions
H58
= In automatic mode "Release tool" with key
H59
= Clear function H58
The following message appears if the function is selected:
700162 0 0 "H58/H59 ACTIVE (TOOL RELEASE WITH PUSH BUTTON)" Page 55.
⇒
It is necessary to release the tool in the program for special measuring tests
⇒
If function
H58
has been output, the spindle tool can be released with key "Tool Unlocking"
while the program is running (with the spindle still and no feed).
⇒
Cancellation is made with "H59" or "RESET"
.
Service mode:
For test runs, you can enter a speed, also if the tool changer is "down“.
M88 & H33
M88 & H34
=
=
Speed input is also possible if the changer is down
Deactivate „H33“
Service mode:
For test runs, the "Tool correctly clamped" monitoring can be deactivated.
M105
=
No
"Clamped without tool" monitoring
This function is again cleared with „JOG“
Off“
.
and „RESET“
or „Machine Control
M88 & M115
=
No "Tool
incorrectly clamped“ monitoring
.
This function is again cleared with „M88“ or „Machine Control Off“
29.01.08 / 11:21 / HR
r - fz-dz15-pos-wz-siemens840d-cd02-01-mu-en
Page 14 of 59
Plik z chomika:
SieKuFan
Inne pliki z tego folderu:
Tool changer service functions (Basket).pdf
(11 KB)
Tool changer special functions (Basket).pdf
(20 KB)
M - functions.PDF
(9 KB)
Odblokowanie Ramienia Narzędzia.pdf
(101 KB)
Chiron840D_Funkcje standardowe.pdf
(4715 KB)
Inne foldery tego chomika:
Fanuc
Kuka
Okuma
Siemens
Zgłoś jeśli
naruszono regulamin