AUDI A6 2003.pdf

(22 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
X
MAKE
ALARM/SIREN
POSITION
AUDI
MOD.
A6*
YEAR
03
* Models with original equipment keyless entry system.
Position the compact alarms and the sirens in the engine compartment, driver’s side.
CENTRAL UNIT POSITION
Position the modular systems and the modules on the left of the steering column, driver’s
side.
+30:
connect with a ring terminal to one of the general power supply terminal in the fuse box.
- 31:
connect with a ring terminal directly to the car body.
+15/54:
connect to the 1,5 mm
2
BLUE/BLACK, wire at the position nr.4, of the orange
connector nr.15 located on the connectors holder plate behind the left bulkhead, driver’s side.
Connect to the BLACK/WHITE wires at the position nr.9 and BLACK/GREEN wires at the
position nr.10, in the 10 way light brown connector, located behind the left sill cover, driver’s
side.
Comfort locking
Negative control signal
The locking of the windows is obtained timing the GREEN/BLUE doors closure wire of the
vehicle.
Connections antitheft/vehicle
Art. 3800
Vehicle
Position
YELLOW/BLACK
GREEN/VIOLET
Pos. nr. 10, 16 way black connector nr.2
GREY/BLACK
GREEN/GREY
Pos. nr. 7, 16 way black connector nr.2
VIOLET
GREEN/WHITE
Pos. nr. 12 , 20 way red connector nr. 4
ORANGE
Ground
Car body
VIOLET/WHITE
Ground
Car body
ORANGE/WHITE
Ground
Car body
The 16 way black and 20 way red connectors are located in the central of the central locking
unit placed under the moquette of the footrest of the driver’s side seat.
Fuel pump
2
Cut the 1,5 mm GREEN/YELLOW wire, at the position nr.32, of the 6 way light blue
connector, near the connector mentioned above.
Relay pump supply
Cut the 1,5 mm
2
GREEN/YELLOW wire located in the wiring harness coming out of the fuse
marked nr. 34 in the fuse box.
Install an additional switch near the left lateral headlamp.
Connect to the GREEN/YELLOW wires at the position nr.1, RED/GREY at the position nr.10,
BLACK/RED at the position nr.12 and BLACK/VIOLET at the position nr.14 located in the 16
way light brown connector coming out of the modular system under the moquette on front of
the driver’s seat.
Positive polarity control signal
2
Connect to the 1 mm RED/GREEN wire at the position nr.9 located in the 12 way black
connector coming out of the modular system under the moquette on front of the driver’s seat.
POWER SUPPLY
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
ACTIVAT./DEACTIVATION
CONTROLS
IMMOBILISATION POINT
STARTER
BONNET SWITCH
DOORS SWITCH
BOOT SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
aua603gbbt.doc
Zgłoś jeśli naruszono regulamin