TroCAM-Manual-EN.pdf

(1898 KB) Pobierz
Operation Manual TroCAM V2 / AlphaCam V10
TROTEC PRODUKTIONS UND
VERTRIEBS GMBH
Linzer Straße 156
A – 4600 Wels
AUSTRIA
Tel.: +43/7242/239-7000
Fax: +43/7242/239-7380
E-Mail: techsupport@troteclaser.com
TROTEC cannot be held responsible for any direct or indirect damages, which result from using or
working with the products electric circuits or software described herein. The apparatus must be
used only by trained and skilled personnel. Before use the manual should be read and followed
carefully.
Furthermore TROTEC reserves the right to change or alter any product described herein without
prior notice.
In case of a failure please first check the device according to section troubleshooting of the Trotec
laser manual. If you should not arrive at a result, please write down all data of device (serial
number, software version, etc.) and call us from a telephone next to the switched on device.
For queries or technical problems please contact your dealer or TROTEC directly at the above
address.
©
This documentation with all illustrations is intellectual property of
Trotec Produktions- u. Vertriebs GmbH.
The entire documentation is given to the user for personal use only.
This documentation must not be reproduced or made available to others without our written
permission. Any breach of law will be prosecuted.
Operation Manual TroCAM V2
/ AlphaCam V10
Table of Contents
1
Table of Contents
3
5
5
8
1 Table of Contents
2 Installation and Activation
2.1 Installation
2.2 Activation
3 TroCAM Main Window
4 Configurations
4.1 Selecting the Postprocessor
4.2 Configuring the toolbar
4.3 Configuring the general settings
4.4 Configuring the system folders
4.5 Configuring the background colour for the drawing area
4.6 Configuring the ruler for the drawing area
9
10
10
11
12
13
13
13
5 CAD Geometry
5.1 Simple 2D-Geometries – lines, arcs, circles, rectangles
5.2 Special 2D-Geometries
14
14
15
6 Utils
6.1 Object Snaps
6.2 Calculating coordinates and mass sizes
6.3 Special functions
16
16
18
18
7 Editing
7.1 Break, Join
7.2 Erase
7.3 Move, Copy, Offset
7.4 Rotate, Mirror
7.5 Change Element Type
19
19
20
20
22
23
8 Import CAD file
8.1 Import files
8.2 Convert splines to polyarcs
24
24
25
9 Laser Functions and TroCAM Bar
9.1 Create and select materials in the material database
9.2 Import and Export Material from Excel
9.3 Tool directions
9.4 Create toolpaths
26
27
28
29
30
03/11/2010
Trotec Produktions- und Vertriebs GmbH_Linzer
Strasse 156, A-4600 Wels, Austria, Technical Support
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
techsupport@troteclaser.com
3 / 51
Operation Manual TroCAM V2
/ AlphaCam V10
Table of Contents
9.5 Lead In/Out
9.6 Optimize cutting order (manual/auto)
9.7 Edit toolpath
9.8 Update NC-Paths
9.9 Send tool path to the laser
32
32
33
33
34
10 Nesting module
10.1 TroCAM
10.2 TroCAM Nesting Upgrade
10.2.1 Defining a new nesting job
10.2.2 Nesting sheet data bank
10.2.3 Nesting parts
10.2.4 Nesting information
10.2.5 Calculation of areas
35
35
39
39
44
45
47
47
11 Appendix
11.1 Trotec IPC (Intelligent Path Control)
11.1.1 Working Description
11.1.2 File Description
11.1.3 Configuration
11.1.4 Execution of IPC for Testpurposes
11.1.5 Execution of IPC within TroCam
11.1.6 Change settings of IPC within TroCAM
11.1.7 Description of vbpost_config.xml file
49
49
49
49
50
50
50
50
51
03/11/2010
Trotec Produktions- und Vertriebs GmbH_Linzer
Strasse 156, A-4600 Wels, Austria, Technical Support
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
techsupport@troteclaser.com
4 / 51
Operation Manual TroCAM V2
/ AlphaCam V10
Installation and Activation
2
Installation and Activation
2.1 Installation
1. Start the PC with
Administrator rights.
2. Insert the installation CD and via autorun the language selection screen will show up.
If Autorun does not work, please run the
setup.exe
in the following directory
\...\Modele_CD_Trotec_2010R1\Setup_Alphacam_2010
3. Select the required language
4. Wait while the setup is configured and prepared
03/11/2010
Trotec Produktions- und Vertriebs GmbH_Linzer
Strasse 156, A-4600 Wels, Austria, Technical Support
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
techsupport@troteclaser.com
5 / 51

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin