MUT3.pdf

(633 KB) Pobierz
Procedure for installing
Service Manual data
MUT3.pdf
Contents
Chapter 1 System requirements for installation of Service Manual Viewer -- 2
Chapter 2 Procedure for Installing ---------------------------------------------------------- 3
2.1 Flow of installation -------------------------------------------------------- 3
2.2 Installation of Service Manual data ---------------------------------- 4
2.3 Uninstallation of Service Manual data ------------------------------ 13
1
Chapter 1 System requirements for installation of Service Manual Viewer
(1) Hardware
·
Operating system : Windows 2000, Windows XP or Windows Vista
Caution: The recommended OS is English version in this installer.
When you use OS in other languages, some characters may be garbled.
There is no problem on the system, so you can keep installing.
·
RAM
·
Display
: More than recommended value of operating system
: Greater than 800X600 pixels resolution and 256 colors
(2) Software
·
Microsoft Internet Explorer 5.5 or 6.0 or 7.0 (Except M.U.T.-3 PC)
·
Acrobat Reader 5.0 or later
Caution: A basic software version of M.U.T.-3 should be RK-0710-00 or later, and
a software version of a viewer system should be MC-0710-00 or later.
Trademarks
·
Microsoft, Windows 2000, Windows XP, Windows Vista and Internet Explorer are registered
trademarks of Microsoft Corporation in the United States and/or other countries.
·
Acrobat ® Reader Copyright © 1987-2001 Adobe Systems Incorporated. All rights reserved.
Adobe, Adobe logo, Adobe Acrobat, and Adobe Acrobat logo are trademarks of Adobe
Systems Incorporated.
2
Chapter 2 Procedure for installing
2.1 Flow of installation
Start
M.U.T.-3 main menu -
Maintenance
- Confirm System
No
Installing the same
versions of these softwares
in advance
M.U.T.-3 basic software :
RK-0710-00
Viewer software
MC-0710-00
Yes
MSB Data Update
2.2. Installing Service
Manual data
Complete
Caution: In case of Windows 2000, Windows XP and Windows Vista,
installation must be started after login by a user who has
authority of
the Administrator.
3
2.2 Installation of Service Manual data
(1) When you set CD-ROM into CD drive, the
W/M CD’s menu
screen (Figure 1) appears automatically.
Click
Installation
button. --Go to (2) on page 5.
Figure 1: W/M CD’s menu screen
Note:
In case that the above screen is not appeared, right-click on
Start
at the lower-left corner of
the desktop and click
Explore.
(Refer to Figure 2)
Then double-click
SMVCD_KICK.exe
in the CD-ROM. (Refer to Figure 3)
Figure 2: Running Explore
Figure 3: Running SMVCD_KICK.exe
4
Zgłoś jeśli naruszono regulamin