99500_54G00_01E_1.pdf

(18548 KB) Pobierz
IMPORTANT
WARNING/CAUTION/NOTE
Please read this manual and follow its instructions carefully. To emphasize special information, the words
WARNING, CAUTION
and
NOTE
have special meanings. Pay special attention to the messages highlighted by
these signal words.
WARNING:
Indicates a potential hazard that could result in death or injury.
CAUTION:
Indicates a potential hazard that could result in vehicle damage.
NOTE:
Indicates special information to make maintenance easier or instructions clearer.
WARNING:
This service manual is intended for authorized Suzuki dealers and qualified service mechanics only.
Inexperienced mechanics or mechanics without the proper tools and equipment may not be able to
properly perform the services described in this manual.
Improper repair may result in injury to the mechanic and may render the vehicle unsafe for the driver
and passengers.
WARNING:
For vehicles equipped with a Supplemental Restraint (Air Bag) System:
• Service on and around the air bag system components or wiring must be performed only by an
authorized SUZUKI dealer. Refer to “Air Bag System Components and Wiring Location View” under
“General Description” in air bag system section in order to confirm whether you are performing ser-
vice on or near the air bag system components or wiring. Please observe all WARNINGS and “Ser-
vice Precautions” under “On-Vehicle Service” in air bag system section before performing service
on or around the air bag system components or wiring. Failure to follow WARNINGS could result in
unintentional activation of the system or could render the system inoperative. Either of these two
conditions may result in severe injury.
• If the air bag system and another vehicle system both need repair, Suzuki recommends that the air
bag system be repaired first, to help avoid unintended air bag system activation.
• Do not modify the steering wheel, instrument panel or any other air bag system component (on or
around air bag system components or wiring). Modifications can adversely affect air bag system
performance and lead to injury.
• If the vehicle will be exposed to temperatures over 93°C (200°F) (for example, during a paint baking
process), remove the air bag system components (air bag (inflator) modules, SDM and/or seat belt
with pretensioner) beforehand to avoid component damage or unintended activation.
FOREWORD
This manual contains procedures for diagnosis, maintenance, adjustments, minor service operations, replace-
ment of components (Service) and for disassembly and assembly of major components (Unit Repair-Overhaul).
Applicable model: RH413/RH416
The contents are classified into sections each of which is given a section number as indicated in the Table of
Contents on following page. And on the first page of each individual section is an index of that section.
This manual should be kept in a handy place for ready reference of the service work.
Strict observance of the so specified items will enable one to obtain the full performance of the vehicle.
When replacing parts or servicing by disassembling, it is recommended to use SUZUKI genuine parts, tools and
service materials (lubricant, sealants, etc.) as specified in each description.
All information, illustrations and specifications contained in this literature are based on the latest product infor-
mation available at the time of publication approval. And used as the main subject of description is the vehicle of
standard specifications among others.
Therefore, note that illustrations may differ from the vehicle being actually serviced.
The right is reserved to make changes at any time without notice.
Related Manual
Manual Name
RH413/RH416 Wiring Diagram Manual
Manual No.
99512-54G20-015
© COPYRIGHT SUZUKI MOTOR CORPORATION 2001
TABLE OF CONTENTS
GENERAL INFORMATION
General Information
0A
Maintenance and Lubrication
0B
HEATING AND AIR CONDITIONING
Heater and Ventilation
1A
Air Conditioning (Optional)
1B
STEERING, SUSPENSION, WHEELS
3
AND TIRES
DRIVE SHAFT AND PROPELLER SHAFT
Front Drive Shaft
4A
Propeller Shafts
4B
Rear Drive Shaft
4C
BRAKE SYSTEM
Brakes
5
Antilock Brake System (ABS)
5B
ENGINE
Engine General Information and
6
Diagnosis (M13/M16 Engines)
Engine Mechanical
6A1
(M13 and M16 Engines)
Engine Cooling
6B
Engine Fuel
6C
Engine and Emission Control System
6E1
(M13/M16 Engines)
Ignition System
6F1
(Electronic Ignition System)
Cranking System
6G
Charging System
6H
Exhaust System
6K
TRANSAXLE, CLUTCH AND
DIFFERENTIAL
Manual Transaxle
Automatic Transaxle (4 A/T)
Clutch
Transfer
Rear Differential
ELECTRICAL SYSTEM
Body Electrical System
Wiring Diagram
Immobilizer Control System (if equipped)
BODY SERVICE
RESTRAINT SYSTEM
Restraint System
Air Bag System
0A
0B
1A
1B
3
8
8A
8G
9
10
10B
4A
4B
4C
5
5B
6
6A1
6B
6C
6E1
6F1
6G
6H
6K
8
8A
8G
9
10
10B
7A1
7B1
7C1
7D
7F
7A1
7B1
7C1
7D
7F
NOTE:
The screen toned Section 8A is in Wiring Diagram Manual mentioned in FOREWORD of this manual.
Zgłoś jeśli naruszono regulamin