Classic Battletech - Battleforce - Faction Counters - Marik.pdf

(7445 KB) Pobierz
counter design by matt heerdt & michael mullins
INSTRUCTIONS
These
Battleforce
counters are meant to be printed on thick
cardstock, cut out, and folded together so that they create a
firm
playing piece you may use over and over again. While
these instructions are simple and will give you good results;
those who don’t have all the materials may feel free to ignore
them and cut out or use the counters however they wish.
you get a clean,
straight cut. Do the
same for the other
strips. Make sure to
cut away the top and
bottom edges of the
paper.
The materials you’ll need:
Inkjet or laser
Printer
110lb “cardstock”
Printer paper
Self healing mat
Hobby knife
Metal ruler
Glue-stick
Fine
tipped
felt
marker
Step 3:
Along the dotted line, similarly draw the knife along your ruler
but do
not
press down. Drawing it lightly along the paper will
score it for easy folding
later. Then cut apart
each counter but do not
trim away all of the white
space yet.
Caution:
Obviously be careful with knives. Do not let children play with
them and make cuts parallel or away from you.
Step 4:
Step 1:
Open the
file
in
Adobe Acrobat
and set the
document up for
printing. When
you reach the
print dialogue,
make sure Page
Scaling is set to
None.
On your
print properties,
choose the
highest quality
setting. This will
use a lot of ink, but will give you the best result. If you’re short
on ink, you may wish to select only the sheets you want to use.
Glue the reverse side of the counter and
fold the two sides together, making sure
that the edges match up. Give the
counters a minute or so to dry and then
trim away the rest of the white edges.
Step 5:
Use your marker and draw it
quickly along the edges of your
counter, removing any evidence
of a white edge. Your counter is
now ready for play.
Optional:
Step 2:
Place the printed cardstock on your self healing mat and place
your ruler on top so that it matches up with the solid printed
line between each strip of counters. Press
firmly
on the ruler
and your hobby knife. Draw the knife along the ruler so that
A set of numbers are available on the last page of each `Mech
and vehicle counter sheet. If you wish, you may cut them out
and glue the numbers to the reverse “radar” side of your
counters so that you can keep track of the unit number without
letting your opponent know which unit is which.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin