Audi A8 D2 Ziza_Interior_LED_Light.pdf

(2983 KB) Pobierz
R
Ziza® Interior Lighting Package Installation Procedures
Part Number
ES2215298
(1997-2002)
for Audi D2 A8
This tutorial is provided as a courtesy by ECS Tuning.
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety
of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools
and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could
damage the vehicle or compromise its safety.
Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is
made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this mate-
rial. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS
MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will ECS Tuning, Incorporated or its affiliates be liable for
any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.
Ziza Interior Lighting Package Installation
ES2215298
R
Fits Audi D2 A8
LED Installation Instructions
Interior Lighting Kit for Audi D2 A8
ES2215298
R
Tools
Trim removal tool – ES517779 (Kit)
5-chip wedge base white LED (qty 2)
5-chip bayonet base white LED (qty 5)
36mm white LED festoon (qty 12)
42mm white LED festoon (qty 2)
Kit Contents
This tutorial explains how to install the LEDs in your Ziza Interior Lighting Kit.
Make the job easier and prevent damage to headliners
and other interior trim with
ECS Tuning Trim and Molding
Removal Tool Sets:
ES2500877
and
ES517779.
Page
-
2
Address:
1000 Seville Road, Wadsworth, OH 44281
Phone:
1.800.924.5172
Web:
www.ecstuning.com
Ziza Interior Lighting Package Installation
ES2215298
R
Fits Audi D2 A8
What are LEDs?
LEDs are Light Emitting Diodes, solid state devices that emit light when connected to electrical
current. They have no moving parts or wire filaments to burn out. They emit a whiter light, run
cooler, and last longer that the incandescent (filament style bulbs) we are replacing in this
tutorial.
Unlike filament bulbs, LEDs are polarity sensitive. They have plus and minus (positive and
negative) electrical terminals that must match the polarity of the applied voltage. Installing the
bulbs “backwards” in the light bulb sockets (with reversed polarity) will not harm them, but they
will not light. Flipping the bulb 180 degrees in the electrical connector cures this problem.
Bulb Types
This kit includes three bulb types, classified by their general shape.
FESTOON -
Conventional incandescent
festoon
bulbs have a shape and general
appearance that is similar to a glass fuse.
Metal caps attached to both ends of a glass tube are
sealed to the tube and attached to the bulb filament.
End caps mount the bulb in its holder and also
conduct electrical current.
LED festoon lights have the same pointed end caps,
but are attached to a bank of LEDs instead of a
filament tube.
WEDGE -
Wedge style bulbs get their name from the
shape of the bulb base. The tapered end of the bulb
“wedges” into the bulb socket.
LED wedge lights fit the bulb socket like a filament
bulb, but are polarity sensitive.
BAYONET
- The bayonet base is formed by a metal
tube with radial pins on its side that engage holes
or tabs in the bulb socket. A central electrical nub
contact at the tapered base of the bulb connects the
bulb to voltage.
While these are also polarity sensitive, the socket
design automatically orients the bulb, ensuring
correct polarity.
festoon
wedge
bayonet
Address:
1000 Seville Road, Wadsworth, OH 44281
Phone:
1.800.924.5172
Web:
www.ecstuning.com
Ziza Interior Lighting Package Installation
ES2215298
R
Fits Audi D2 A8
General Tips
•
When prying down on the assemblies to remove them, pry on the notched end of
the lens. Insert the narrow tool tip
between
the lens plastic and any metal collar
used to reinforce the lens mounting hole. Push in on the retaining clip first to
compress and release it. Then pry down.
•
The spring bulb retainer is also the circuit conductor. If necessary, gently bend
the metal retainer so it holds the bulb tight. This will help prevent intermittent or
flickering LED operation caused by a loose connection.
Install the bulbs with the LEDs facing toward the lens.
•
festoon
incandescent
front
LED
back
assembly removal
non mar pry tool
notch
metal collar in trim panel
retaining clip
(plastic or metal)
notch
lens front
Bulbs
spring bulb retainer
lens back
lens side clip
Page
-
4
Address:
1000 Seville Road, Wadsworth, OH 44281
electrical connector
Phone:
1.800.924.5172
Web:
www.ecstuning.com
Ziza Interior Lighting Package Installation
ES2215298
R
Fits Audi D2 A8
Ziza Interior Lighting Kit Locations
Make______Audi____________________________________________
Model______D2 A8_______________________________________
Kit Part Number____ ES2215298____________________________________
trunk
36mm festoon (qty 3)
ES2515359
rear dome
36mm festoon (qty 2)
ES2515359
5-chip bayonet (qty 2)
ES2515356
rr door (puddle light)
36mm festoon
ES2515359
under front seat
5-chip wedge (qty 2)
ES2526289
lr door (puddle light)
36mm festoon
ES2515359
rf door (puddle light)
36mm festoon
ES2515359
glove box
5-chip bayonet
ES2515356
lf door (puddle light)
36mm festoon
ES2515359
footwell
36mm festoon (qty 2)
ES2515359
front dome
42mm festoon (qty 2)
ES2515360
5-chip bayonet (qty 2)
ES2515356
sun visor
36mm festoon (qty 2)
ES2515359
Page
-
5
Address:
1000 Seville Road, Wadsworth, OH 44281
Phone:
1.800.924.5172
Web:
www.ecstuning.com

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin