9034PC.PDF

(82 KB) Pobierz
DS9034PC
PowerCap
www.dalsemi.com
FEATURES
Provides 10 years of battery backup power for
Non-volatile SRAMs in the PowerCap
Module (PCM) package
Snaps directly onto a surface-mounted
PowerCap module base to form a complete
Nonvolatile SRAM module
Attaches after module base has been surface-
mounted to protect lithium battery from the
high temperatures of reflow soldering
Maintains mechanical and electrical
connection with module base even during
severe shock and vibration stresses
Detachment feature allows easy removal
using a regular screwdriver
Periodic replacement allows Nonvolatile
SRAM module life to be extended
indefinitely
Compatible with these PowerCap module
bases:
DS1230YP/ABP/WP
DS1245YP/ABP/WP
DS1250YP/ABP/WP
DS1330YP/ABP/WP
DS1345YP/ABP/WP
DS1350YP/ABP/WP
PACKAGE OUTLINE
GND
V
BAT
TOP VIEW
SIDE VIEW
PIN DESCRIPTION
V
BAT
GND
- +3 Volt Battery Output
- Ground
ABSOLUTE MAXIMUM RATINGS
Operating Temperature
Storage Temperature
-40°C to +85°C
-40°C to +85°C
BATTERY CHARACTERISTICS
Nominal Voltage
Nominal Capacity
Chemistry
Data Retention Life
3 volts
130 mAh
Li(CF)
X
10 Years (25°C)
DESCRIPTION
The DS9034PC PowerCap is a snap-on lithium power source for Nonvolatile SRAMs in Dallas
Semiconductor’s directly surface-mountable PowerCap module base package. After a PowerCap module
has been soldered in place and cleaned, the DS9034PC PowerCap is snapped onto the base to form a
complete Nonvolatile SRAM module. The PowerCap is keyed to prevent incorrect attachment and is
designed to maintain mechanical and electrical contact with its host module base even during severe
mechanical shock and vibration. The DS9034PC is easily removed by inserting a regular screwdriver
into the detachment feature and prying gently outward and upward to release the PowerCap from the
module base.
1 of 3
113099
DS9034PC
POWERCAP ATTACHMENT
POWERCAP REMOVAL
2 of 3
DS9034PC
DS9034PC PACKAGE DIMENSIONS
PKG
DIM
A
B
C
D
E
MIN
0.845
0.955
0.210
0.065
0.065
INCHES
NOM
0.850
0.960
0.215
0.070
0.070
MAX
0.855
0.965
0.220
0.075
0.075
ATTENTION: BATTERY COMPONENT
The DS9034PC contains a lithium battery. Do not short, ground or apply external voltages to the
electrical portions of this device. Do not expose to temperatures over 85°C. Do not subject this device to
any type of cleaning process. Store only in non-conductive containers. Failure to observe these
precautions may result in battery discharge or decreased battery life.
3 of 3
Zgłoś jeśli naruszono regulamin