1240.PDF
(
64 KB
)
Pobierz
19-0425; Rev 1; 9/95
KIT
ATION
EVALU
LE
B
AVAILA
3V, Ultra-Low-Power
Quadrature Modulator
____________________________Features
o
IF Output Frequency up to 80MHz
o
Input Bandwidth up to 15MHz
o
On-Chip Oscillator with External Tuning Circuit
o
On-Chip Divide-by-8 Prescaler
o
Integrated Quadrature Phase Shifters
o
Self-Biased Differential Baseband Inputs
o
CMOS-Compatible Enable
o
4.1mA Operating Supply Current
2µA Shutdown Supply Current
_______________General Description
The monolithic MAX2452 is a quadrature modulator
with supporting oscillator and divide-by-8 prescaler. It
operates from a single +3V supply and draws only
4.1mA. The modulator accepts differential I and Q
baseband signals with amplitudes up to 1.35Vp-p and
bandwidths up to 15MHz. It produces a differential out-
put up to 80MHz.
Pulling the CMOS-compatible ENABLE pin low reduces
the supply current to 2µA. To minimize spurious feed-
back, the MAX2452’s internal oscillator is set at twice
the IF via external tuning components. The oscillator
and associated phase shifters produce differential sig-
nals exhibiting low amplitude and phase imbalance,
yielding 42dB sideband rejection. The MAX2452 comes
in a 16-pin narrow SO package.
MAX2452
________________________Applications
Digital Cordless Phones
GSM and North American Cellular Phones
Wireless LANs
Digital Communications
Two-Way Pagers
______________Ordering Information
PART
MAX2452ISE*
TEMP. RANGE
-20°C to +85°C
PIN-PACKAGE
16 Narrow SO
* An alternate marking, MAX2452CSE, has been identically tested.
________________Functional Diagram
__________________Pin Configuration
LO_V
CC
11
8
9
10
LOCAL
OSCILLATOR
÷2
PRESCALER
0°
÷4
12
PRE_OUT
TOP VIEW
TANK
TANK
LO_GND
IF 1
GND 2
I 3
I 4
Q 5
Q 6
ENABLE 7
TANK 8
16 IF
15 GND
14 V
CC
I
I
Q
Q
V
CC
QUADRATURE
PHASE
GENERATOR
90°
÷2
3
4
MODULATOR
5
6
14
MASTER BIAS
BANDGAP
BIAS
16
MAX2452
13 N.C.
12 PRE_OUT
11 LO_V
CC
10 LO_GND
9
TANK
Σ
IF
IF
1
MAX2452
SO
2, 15
GND
7
ENABLE
________________________________________________________________
Maxim Integrated Products
1
Call toll free 1-800-998-8800 for free samples or literature.
3V, Ultra-Low-Power
Quadrature Modulator
MAX2452
ABSOLUTE MAXIMUM RATINGS
V
CC
, LO_V
CC
to GND............................................-0.3V to +4.5V
ENABLE, TANK, TANK, I, I, Q, Q to GND ..................V
CC
+ 0.3V
Continuous Power Dissipation (T
A
= +70°C)
SO (derate 8.33mW/°C above +70°C) ..........................667mW
Operating Temperature Range ...........................-20°C to +85°C
Storage Temperature Range ............................–65°C to +165°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(V
CC
= LO_V
CC
= 2.7V to 3.3V, T
A
= -20°C to +85°C, unless otherwise noted.)
PARAMETER
Supply Voltage Range
Supply Current
Shutdown Supply Current
Enable/Disable Time
ENABLE Bias Current
ENABLE Low Voltage
ENABLE High Voltage
IF Voltage Level
IF Voltage Level
TANK Voltage Level
TANK Voltage Level
I, I, Q, Q Voltage Level
Differential Input Impedance
SYMBOL
V
CC
, LO_V
CC
I
CC ON
I
CC OFF
t
ON/OFF
I
EN
V
ENL
V
ENH
V
IF
V
IF
V
TANK
V
TANK
V
I
, V
I
, V
Q
, V
Q
Z
II
, Z
QQ
V
CC
- 0.4
V
CC
- 1.7
V
CC
- 1.7
LO_V
CC
- 1.1
LO_V
CC
- 1.1
1.25
35
1.5
44
V
CC
- 1.35
V
CC
- 1.35
LO_V
CC
- 0.8
LO_V
CC
- 0.8
1.75
Enable = V
CC
- 0.4V
Enable = V
CC
- 0.4V
Enable = 0.4V
CONDITIONS
MIN
2.7
4.1
2
10
1
10
0.4
TYP
MAX
3.3
7
20
UNITS
V
mA
µA
µs
µA
V
V
V
V
V
V
V
kΩ
AC ELECTRICAL CHARACTERISTICS
(V
CC
= LO_V
CC
= 3.0V, f
OSC
= 140MHz, ENABLE = 2.6V, f
II
= f
QQ
= 600kHz, T
A
= -20°C to +85°C, unless otherwise noted.)
PARAMETER
Differential Input Voltage
I and Q Signal Bandwidth
IF Differential Output Voltage
I/Q Amplitude Match
I/Q Phase Match
Sideband Rejection
LO Leakage at Output
Oscillator Frequency Range
PRE_OUT Output Voltage
PRE_OUT Slew Rate
f
OSC
V
PRE_OUT
SR
PRE_OUT
V
II
= V
QQ
= 1.2Vp-p
(Notes 1, 2)
R
L
= 10kΩ, C
L
< 6pF
R
L
= 10kΩ, C
L
< 6pF, rising edge,
T
A
= +25°C
70
SYMBOL
V
IIp-p
, V
QQp-p
BW
IQ
V
IFIFp-p
(Note 1)
(Note 1)
V
II
= V
QQ
= 1.2Vp-p, R
L
= 200kΩ
differential, C
L
< 5pF differential
65
<±0.3
<±3
42
-36
140
0.35
60
160
CONDITIONS
MIN
TYP
1.2
MAX
1.35
15
UNITS
Vp-p
MHz
mVp-p
dB
degrees
dB
dBc
MHz
Vp-p
V/µs
Note 1:
Guaranteed by design, not tested.
Note 2:
The frequency range can be extended in either direction, but has not been characterized. At higher frequencies, the IF
output level may decrease and distortions may increase.
2
_______________________________________________________________________________________
3V, Ultra-Low-Power
Quadrature Modulator
__________________________________________Typical Operating Characteristics
(V
CC
= LO_V
CC
= 3.0V, f
OSC
= 140MHz, ENABLE = 2.6V, f
II
= f
QQ
= 600kHz, R
L
(IF, IF) = 200kΩ differential, C
L
(IF, IF) < 5pF
differential, T
A
= +25°C, unless otherwise noted.)
SUPPLY CURRENT
vs. TEMPERATURE
4.8
4.7
4.6
4.5
4.4
4.3
4.2
4.1
4.0
3.9
3.8
3.7
3.6
3.5
-30
MAX2452-01
MAX2452
SHUTDOWN SUPPLY CURRENT
vs. TEMPERATURE
MAX2452-02
IF OUTPUT
vs. BASEBAND INPUT
MAX2452-03
16
14
SUPPLY CURRENT (µA)
12
10
8
6
4
2
0
-30
V
CC
= 2.7V
V
CC
= 3V
V
CC
= 3.3V
-30
-34
OUTPUT (dBV
RMS
)
-38
-42
-46
-50
-54
dBV
RMS
20
SUPPLY CURRENT (mA)
V
CC
= 3.3V
V
CC
= 3V
V
CC
= 2.7V
Vp-p = 2 2 x 10
(V)
-10
10
30
50
70
90
-10
10
30
50
70
90
-26
-22
-18
-14
-10
-6
TEMPERATURE (°C)
TEMPERATURE (°C)
BASEBAND INPUT (dBV
RMS
)
IF OUTPUT
vs. SUPPLY VOLTAGE
MAX2452-04
IF OUTPUT
vs. TEMPERATURE
MAX2452-05
SIDEBAND REJECTION
vs. IF FREQUENCY
-32
SIDEBAND REJECTION (dBc)
-34
-36
-38
-40
-42
-44
-46
-48
V
II
= 1.2Vp-p
V
QQ
= 1.2Vp-p
MAX2452-06
74
72
70
IF OUTPUT (mVp-p)
68
66
64
62
60
58
56
54
2.7
2.8
2.9
3.0
V
CC
(V)
3.1
3.2
T
A
= +70°C
T
A
= +25°C
T
A
= 0°C
T
A
= -25°C
T
A
= +85°C
70
V
CC
= 3V
68
IF OUTPUT (mVp-p)
-30
66
64
62
3.3
60
-30
-50
-10
10
30
50
70
90
35
40 45
50
55 60
65
70 75 80
TEMPERATURE (°C)
IF FREQUENCY (MHz)
SIDEBAND REJECTION
vs. TEMPERATURE
MAX2452-07
LO LEAKAGE
vs. IF FREQUENCY
MAX2452-08
PRE_OUT WAVEFORM
R
L
= 10kΩ
C
L
< 6pF
MAX2452-09
-30
-32
SIDEBAND REJECTION (dBc)
-34
-36
-38
-40
-42
-44
-46
-48
-50
-30
-10
10
30
50
70
V
II
= 1.2Vp-p
V
QQ
= 1.2Vp-p
-30
-32
LO LEAKAGE (dBc)
-34
-36
-38
-40
-42
-44
100mV/
div
90
35
40 45 50
55
60
65
70 75
80
TEMPERATURE (°C)
IF FREQUENCY (MHz)
20ns/div
_______________________________________________________________________________________
3
3V, Ultra-Low-Power
Quadrature Modulator
MAX2452
____________________________Typical Operating Characteristics (continued)
(V
CC
= LO_V
CC
= 3.0V, f
OSC
= 140MHz, ENABLE = 2.6V, f
II
= f
QQ
= 600kHz, R
L
(IF, IF) = 200kΩ differential, C
L
(IF, IF) < 5pF
differential, T
A
= +25°C, unless otherwise noted.)
MODULATOR OUTPUT SPECTRUM
MAX2453-10
0
-10
-20
(dBc)
-30
-40
-50
-60
69.0
69.4
70.0
(MHz)
70.6
V
II
= 1.2Vp-p
V
QQ
= 1.2Vp-p
71.0
_____________________Pin Description
PIN
1
2, 15
3
4
5
6
7
8
9
10
11
12
13
14
16
4
NAME
IF
GND
I
I
Q
Q
ENABLE
TANK
TANK
LO_GND
LO_V
CC
PRE_OUT
N.C.
V
CC
IF
FUNCTION
IF Inverting Output
Ground
Inphase Input
Inphase Inverting Input
Quadrature Input
Quadrature Inverting Input
Enable Control, active high
Local-Oscillator Resonant Tank
Input
Local-Oscillator Resonant Tank
Inverting Input
Local-Oscillator Ground
Local-Oscillator Supply
Local-Oscillator Divide-by-8
Prescaled Output
No Connect, no internal connection
to this pin
Modulator Supply
IF Output
_______________________________________________________________________________________
3V, Ultra-Low-Power
Quadrature Modulator
_______________Detailed Description
The MAX2452 quadrature modulator integrates several
important RF functions on a single chip. It includes dif-
ferential buffers for the baseband inputs, two double-
balanced mixers, a local oscillator, a quadrature phase
generator, and a divide-by-8 prescaler. The prescaler
simplifies the implementation of a phase-locked loop.
Each of the functional blocks (shown in the
Functional
Diagram)
is described in detail in the following sec-
tions.
L0_V
CC
MAX2452
R
L
5k
Q3
TANK
TANK
R
L
5k
Q4
Local Oscillator
The local-oscillator section is formed by an emitter-cou-
pled differential pair. Figure 1 shows the equivalent
local-oscillator circuit schematic. An external LC reso-
nant tank determines the oscillation frequency, and the
Q of this resonant tank determines the phase noise of
the oscillator. The oscillation frequency is twice the IF
frequency, so that the quadrature phase generator can
use two latches to generate precise quadrature signals.
Q1
Q2
TO
DIVIDE-BY-2
Quadrature Phase Generator
The quadrature phase generator uses two latches to
divide the local-oscillator frequency by two, and gener-
ates two precise quadrature signals. Internal limiting
amplifiers shape the signals to approximate square
waves to drive the Gilbert-cell mixers in the modulator.
The inphase signal (at half the local-oscillator frequen-
cy) is further divided by four for an external phase-
locked loop.
Figure 1. Local-Oscillator Equivalent Circuit
Prescaler
The prescaler output, PRE_OUT, is buffered and
swings typically 0.35Vp-p with a 10kΩ and 6pF load. It
can be AC-coupled to the input of a frequency synthe-
sizer.
Master Bias
During normal operation, ENABLE should remain above
V
CC
- 0.4V. Pulling the ENABLE input low shuts off the
master bias and reduces the circuit current to 2µA. The
master bias section includes a bandgap reference
generator and a PTAT (Proportional To Absolute
Temperature) current generator.
Modulator
The modulator accepts up to 1.35Vp-p I and Q differen-
tial baseband signals up to 15MHz, and upconverts
them to higher-frequency IF signals. Since these inputs
are biased internally at around 1.5V, you can improve
carrier suppression by externally capacitively coupling
the signals into these high-impedance ports (the differ-
ential input impedance is approximately 44kΩ). The
self-bias design is for very low on-chip offset, resulting
in excellent carrier suppression. The IF output is
designed to drive a high impedance (>20kΩ), such as
an IF buffer or an upconverter mixer.
_______________________________________________________________________________________
5
Plik z chomika:
Kot_Maciek
Inne pliki z tego folderu:
0001.PDF
(10 KB)
1003.PDF
(374 KB)
1002.PDF
(139 KB)
1004.PDF
(342 KB)
1005.PDF
(170 KB)
Inne foldery tego chomika:
PDF2
PDF3
SPICE
Zgłoś jeśli
naruszono regulamin