Readme: FSP-5000-RPS V2.10.8 Reference number: F.01U.005.615 Name: Fire Programming System Version: V2.10.8 Checksum: none Please check Bosch Extranet for the latest version of FSP-5000-RPS. Die jeweils akuellste Version der FSP-5000-RPS-Software finden Sie im Bosch Extranet. ==> http://extranet.bosch-sicherheitssysteme.de Description: ============ Configuration software for the fire panel FPA-5000 und FPA-1200. Compatibility ============= RPS has been renamed to FSP-5000-RPS, as this version is only useable for the fire system FPA-5000 and FPA-1200. Other Systems from Detection Systems or Radionics are not supported. You can install FSP-5000-RPS now in parallel to American RPS-Versions on one PC. Additionally since RPS 2.9.12 the version numbering of RPS is decoupled from version numbers of FPA-5000. FSP-5000-RPS V2.9.13 replaces all former Versions of RPS for FPA-5000 (5.0.1, 5.1.2, 5.1.4, 5.1.5, 5.1.10, 5.2.35, 1.3.18, 2.0.49, 2.0.50, 2.0.51, 2.1.35, 2.5.30, 2.5.34, 2.5.36, 2.6.12, 2.6.13, 2.6.14, 2.6.15, 2.7.21, 2.7.22, 2.8.49, 2.8.50, 2.9.12, 2.9.13). You can configure the following FPA5000 Versions: (1.0.1, 1.1.3 - 1.1.7, 1.2.5, 1.2.8, 1.3.8, 2.0.13, 2.0.15, 2.0.16, 2.0.17, 2.1.8, 2.5.15, 2.5.20, 2.5.25, 2.6.5, 2.6.11, 2.6.13, 2.7.5, 2.7.7, 2.7.10, 2.7.14, 2.8.20, 2.8.24, 2.8.26, 2.8.28, 2.10.5, 2.10.10, 2.10.11 2.11.4) If an older version of FSP-5000-RPS for FPA-5000 is installed on your PC, please deinstall it, before installing FSP-5000-RPS. The existing database of configurations remains, you can use it with FSP-5000-RPS if you choose this option during installation. When you create a new configuration, you will have to choose for wich firmware version of the Panel it will be: FPA-5000: 1.x, 2.0, 2.1, 2.5, 2.6, 2.7, 2.8, 2.10, 2.11 FPA-1200: 2.5, 2.6, 2.7, 2.8, 2.10, 2.11 Upgrade of configurations ------------------------- You can upgrade a configuration to a higher version-level, if you want to install a new firmware on your panel. Select in the database-view a configuration, right-mouse-click will offer you an "Upgrade to". You can either upgrade the existing config, or make an upgraded copy of it, if you prefer to keep the old one. Upgrades from or to FPA-5000 configurations to FPA-1200 configurations are not supported. Nevertheless existing FPA-1200 configurations can be imported to an FPA-5000 configuration by using the feature 'Import from other configuration' in the context-menu of 'Node'. Supported MS-Windows versions ============================== Windows 8 (32Bit) Windows 8 (64Bit) Windows 7 (32Bit) Windows 7 (64Bit) Windows XP SP3 (32Bit) Windows XP SP3 (64Bit) Windows XP SP2 (32Bit) Windows XP SP2 (64Bit) Differences V2.9.13 to V2.10.8 ============================== New Features: ------------- - Support of Windows 8 - Support of Praesideo VAS System - Support of up to 244 VAS triggers for Praesideo - Additional status information at "Status Groups" node moved to specific status node - New feature "Multiple VAS Trigger" configuration to allow modification of more than one VAS trigger within one window - New feature "Export VAS Triggers" to allow the export of defines VAS triggers (csv format) - Support of new License Cards for Praesideo - Allow MPP file generation for MTS type "FAT" - New default value for VAS Trigger configuration "Use as" ("NAC/Signaling circuit" instead of "Control") - Support of new conventional devices "Fireray 3000" and "Fireray 5000" Fixes: ------------- - Defect #229044 fixed (Bypass / Block of a Plena trigger "Status" not possible) - Defect #222209 fixed (Relays of FLM-420-RLV1 and ENO-module are not activated when selected under "reset action") - Defect #238842 fixed (RPS - too restrictive check for Trigger based rules - */* not possible) - Defect #240304 fixed (RPS - too restrictive check for 6 Soundergroups in case of Voice-Sounders) - Defect #243215 fixed (RPS: Uploading of a configuration (from the panel to RPS) fails) Differences V2.9.13 to V2.9.12 ============================== New Features: ------------- - Export shows function type "PANEL" only for sub address 0 (zero). For all others (1-9) function type "SYSTEM_STATUS" is shown. - Export: The item "Display" is now bypassable by default Fixes: ------------- - Defect #240487 fixed (FPP-TI13 are not listed in the sequence they were inserted after upload) - Defect #235670 fixed (UGM2040: MCP export for ENO Module and transmission device are identical) Differences V2.9.12 to V2.8.50 ============================== New Features: ------------- - Configure connection to Condition Monitoring server - Activate/Deactivate Condition Monitoring at each panel - Allow temporary activation of Condition Monitoring - Activate/deactivate Panel Networking over IP - Readout LSN Device serial numbers and list serial numbers at RPS GUI - Save serial numbers to CSV-File - Allow use of Condition Monitoring activation state as rule source - Support of new devices "IR3 Flame Detector ? 2wire", "IR3 Flame Detector ? 4wire" and "AP Sensing N4387A" - values for power of FNM-420U-A-BS and FNM-420U-A/B changed from 4.2 to 4.35 mA Differences V2.8.50 to V2.8.49 ============================== Fixes: ------------- - Defect #218783 fixed (Enabling rule of "group address" in connection with FLM-420-4CON reset action modified since it was blocked somtimes). New Features: ------------- - Modified the supported user defined usage types for "Freischalteeinrichtung"(FSE). - Warn user in case a status trigger of "From State" is unequal to "Day mode" if "To State" is configured as "Wait for Alarmverification ack.". - Support of Wagner Device "Fire Beam plus" Differences V2.8.49 to V2.8.48 ============================== Fixes: ------------- - Defect #222926 fixed (unmotivated loss of Day mode activation in rules and time control action) Differences V2.8.48 to V2.8.45 ============================== Fixes: ------------- - Errors in translations Differences V2.8.45 to V2.7.22 ============================== New Features: ------------- - RPS can connect to panel via IP connection - Ethernet parameters of the panel can be configured manually or automatically - MCP export file for the Panels selected - New language - Romanian - New reboot algorithm - MPP export considers all nodes - Topology Overview extended to support Ethernet topology. - Support configuration of Switches - Panel time can be set to PC time - Logout is visible to user before disconnect - To an LSN-bus with extended line monitoring (EN 54-13) up to ten FLM-420-EOL4W devices can be connected Differences V2.7.22 to V2.6.15 ============================== New Features: ------------- - Support of new LSN elements for EN54-13 compliance * FLM-420 EOL 4W (4 wire end of line module) * FPP-5000-TI13 (Remote power supply) - 200 users (instead of 10) - Programmable inputs with sub addresses - New countries * Philipines * Maldives - Sensim configuration files can be created - FNM-420U Sounders with uninterrupted alert (VdS 3536) - Support for AT3000 ISDN transmission device. Fixes: ------ - Auto detection of T-tap structures - Problem "Database change failed error" is fixed. - Support of previous 2.7 FPA-5000 systems (Version 2.7.7 and 2.7.10) is implemented - Fix for renaming the Exported Counter - Fix for creating a template with more than one trigger based rule - Fix for Superflous Play buttons in output - All counters are offered to the user - All known compound states are offered for all rules regardless the respective device actually delivers this state - All existing usage types are offered for the inputs of the LSN element FLM-420 RLE Hints for the usage of FSP-5000-RPS =================================== Usage of USB for connections to FPA5000 --------------------------------------- The PCTRL Hardware V2.x/V3.x supports connection via USB. The latest USB drivers are always copied to the \FSP_5000_RPS\RAMV\USB (in case FSP_5000_RPS was your installation path). In case of communication problems please update these drivers manually. General procedure to follow for a manual upgradation of drivers 1) Connect FPA-5000 to the system via USB. 2) Now navigate to ?Device Manager? -> via ?Control Panel? -> ?Administrative Tools? -> ?Computer Management?. 3) Expand the node ?FPA Devices?, right click on ?USB FPA5000 Device? and select ?Properties?. 4) In the ?Properties? page goto the ?Driver? tab and select ?Update Driver?. 5) In the dialog which follows - select the option which indicates that you should specify the path where the new driver can be found. Enter the path of the new driver as C:\FSP_5000_RPS\RAMV\USB (assuming that you have selected to install at C:\FSP_5000_RPS) 6) Windows will now update the USB device drivers. Note : The drivers are digitally signed now. A driver for Windows 7 / Window 8 (64-Bit) is available. Please refer to the installation guide "USB Driver Installation Windows 7 and Windows 8.pdf" in the driver directory. Note : Ensure that you run FSP-5000-RPS installation as an administrator.i.e Right click on setup.exe and select "Run as Administrator" --------------------------------------- After the installation of this driver you can choose in the Panel Communication dialog "USB Connection". Attention: plugging the USB of the FPA5000 to a PC/Laptop will produce a Ground-Fault at the panel. This report can be ignored for the time you are connected. Maximum length for USB-Cables: 3 meters =================================== In case you are further using RS2...
kolek_92_69