rf1283.pdf

(241 KB) Pobierz
RF1283
•
•
•
•
Ideal Front-End Filter for European Wireless Receivers
Low-Loss, Coupled-Resonator Quartz Design
Simple External Impedance Matching
Rugged TO39 Hermetic Package
The RF1283 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 433.92 MHz receivers. Receiver designs using this filter include superhet with
10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are wire-
less remote-control and security devices operating in Europe under ETSI I-ETS 300 220, in Germany under
FTZ 17 TR 2100, in the United Kingdom under DTI MPT 1340 (for automotive only), in France under PTT
Specifications ST/PAA/TPA/AGH/1542, and in Scandinavia.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s ad-
vanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with
simple external impedance matching (not included). Quartz construction provides execellent frequency sta-
blility over a wide temperature range.
433.92 MHz
SAW Filter
TO39-3 Case
Electrical Characteristics
Characteristic
Center Frequency at 25°C
Absolute Frequency
Tolerance from 433.92 MHz
Insertion Loss
3 dB Bandwidth
Rejection
at f
C
- 21.4 MHz (Image)
at f
C
- 10.7 MHz (LO)
Ultimate
Temperature
Operating Case Temp.
Turnover Temperature
Turnover Frequency
Freq. Temp. Coefficient
Frequency Aging
External Impedance
Absolute Value during the First Year
Series Inductance
Shunt Capacitance
Lid Symbolizaation (in addition to Lot and/or Date Codes)
T
C
T
O
f
O
FTC
|fA|
L1
L2
C1
C2
2, 7
1
4, 7, 8
-35
20
25
f
C
0.032
<±10
33
39
6.8
8.2
RFM RF1283
pF
2
Sym
f
C
∆f
C
IL
BW
3
Notes
2, 3, 4, 5, 6
2, 4, 7
2, 3, 4, 7
400
40
15
Minimum
433.840
Typical
Maximum
434.00
±80
3
500
50
30
80
Units
MHz
kHz
dB
kHz
dB
5.0
700
+85
30
°C
°C
MHz
ppm/°C
2
ppm/yr
nH
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Frequency aging is the change in f
C
with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture, which is connected to a 50Ω test system with
VSWR
≤
1.2:1. The test fixture’s L and C are adjusted for minimum insertion loss at the filter center frequency, f
C
. Note that insertion loss, bandwidth,
and passband shape are dependent on the impedance matching component values and quality. The optimum impedance matching component val-
ues are dependent on circuit parasitic losses.
3. The frequency f
C
is defined as the midpoint between the 3dB frequencies.
4. Unless noted otherwise, specifications apply over the entire specified operating temperature range.
5. One or more of the following U.S. Patents apply: 4,454,488; 4,616,197; and others pending.
6. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
7. The design, manufacturing process, and specifications of this device are subject to change without notice.
8. The turnover temperature, T
O
, is the temperature of maximum (or turnover) frequency, f
O
. The nominal center frequency at any case temperature,
TC, may be calculated from: f=f
O
[1-FTC (T
O
-T
C
)2].
RF Monolithics, Inc.
Phone: (972) 233-2903
Fax: (972) 387-9148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com
http://www.rfm.com
RF1283-101599
Page 1 of 2
433.92 MHz
Absolute Maximum Ratings
Rating
Incident RF Power
SAW Filter
Value
+13
±30
-40 to +85
Units
dBm
VDC
°C
DC Voltage Between Any Two Pins (Observe ESD Precautions)
Case Temperature
Typical Filter Response
Typical filter responses are shown below. The actual response is depen-
dent on external impedance matching and circuit layout. Illustrated fre-
quencies and minimum rejection for LO and IMAGE are shown only for
superhet receivers with
10.7 MHz IF.
Amplitude Response
0
-10
-20
Amplitude Response
-30
-40
-50
-60
-70
-80
5 MHz/div
Frequency
Image
LO
0
dB
-1
-2
-3
-4
-5
-6
-7
-8
150 KHz/div
Frequency
Min 3dB
Passband
at 25
o
C
Case Design
C
G
B
H
F
A
E
D
(3 places)
Electrical Connections
Bottom View
Pin
1
2
3
Connection
Input or Output
Output or Input
Case Ground
Pin 1
Pin 2
Pin 3
J
(2 places)
45°
Typical Test Circuit
Millimeters
Inches
Min
Max
0.366
0.125
0.098
0.138
0.018 Nominal
0.200 Nominal
0.100 Nominal
0.100 Nominal
0.040
0.055
Dimensions
Min
To 50
Ω
LOAD
L
From 50
Ω
SOURCE
1
2
3
L
Max
9.30
3.18
A
B
C
D
E
F
G
H
J
1.40
2.50
C
C
3.50
0.46 Nominal
5.08 Nominal
2.54 Nominal
2.54 Nominal
1.02
RF Monolithics, Inc.
Phone: (972) 233-2903
Fax: (972) 387-9148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com
http://www.rfm.com
RF1283-101599
Page 2 of 2

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin